Today the requirements for a modern production are extremely high and complex. The awareness for safety is high, the budget usually low. Time for production is short, the staff likewise. Panther took all these challenges into consideration and found an intelligent solution: The FOXY, a unique crane concept. All parts of the crane can be stored and transported on the dolly. The PANTHER FOXY Crane is a product that has been created and built by experts for experts – to satisfy the high demands of every grip and camera man.

The Panther Vario Jib is a versatile camera jib arm. Telescopic arms on both sides make the Vario Jib a universal piece of equipment for many shots. The max. payload is 80kg / 176lbs, despite its compact design and weight of only 22kg / 48lbs. The length of the Vario Jib can be extended with an extention (available in 2 different lengths) up to 1m. This adjustment is done very fast and without any tools.

Features:

Length

(retracted without extention)                      1 m | 3,28 ft.

max. Length

(extended without extention)                  1,6 m | 5,25 ft.

max. Length

(extended with 1 m extention)                 2,6 m | 8,5 ft.

Weight

(without extention)                                       22 kg

Payload                                                            80 kg

Weighing only 29 lbs. (13.2kg), it supports 40 lbs. (18kg) of camera and fluid head. So compact, it folds up with no loose parts and fits into a baby tripod case. Its unique telescopic design allows it to work in constricted areas and also unfold to create a dramatic 6 foot lift. And best of all, it uses the 100mm style tripod and head you already own. Like the rest of the Losmandy line, it is manufactured to the highest quality standards: all parts are anodized black machined aluminum or stainless steel. All moving parts are controlled by sealed precision ball bearings. Bubble levels are located on the center column and camera plate for easy levelling. With a weight ratio of less than one-to-one, and the sliding counterweight shaft for fine tuning, the arm can be balanced in a matter of seconds, with a limited number of counter weights. Since no chains, belts or cables are used, the Losmandy Porta-Jib Traveller requires little maintenance. Boom friction and pan friction with variable drag are standard features.

The Panther Tower provides new ideas and unprecedented shooting for a cost-effective price. With electrically powered movements and remote control, the tower is perfect for dynamic driving shots with a remote head. It can be mounted and applied to any vehicle both vertically and horizontally. The lightweight and slim design ensures a good view for the driver. The Tower was designed to be able to move a lot of load. As a result, it reaches a maximum payload of up to 80kg / 176 lbs.

The new Classic Plus camera dolly is the successor of the worldwide loved Classic Dolly. The operators love the Classic and with the new Classic Plus a new standard was set. The dolly is based on a rugged, almost maintenance free and sturdy design. The central column configuration of the Classic PLUS Dolly provides its user with easy operation and unconstrained versatility already in his basic configuration. All control elements are coloured to be easily recongized and easy to handle. The bolts can be fixed in „open“ position and can be adapted to the tracks perfectly – especially in curves. The ergonomic design facilitates intuitive working. Switch-over is completely done without tools. So the Classic Plus can be operated in narrow gauge (36 cm) or in wide gauge (62 cm) by using the locking pin.

The Twister Doorway Dolly offers you new possibilities concerning mobility and flexibility. It is characterized by the new foldable push bar, which ensures more space and comfort for the cameraman and his assistant. The Twister Dolly is also available with wide go-kart wheels now! The central performance features are the combination between studio wheels and track wheels. They immediately allow the possibility to drive on tracks (gauge 62cm) or with studio wheels, without the time consuming wheel change. With the low total width of the dolly (78cm) moves through door widths should not pose any problem. With the three choosable steering modes (front, rear and round-a-round) the Twister dolly can maneuver itself comfortably and it can be filmed exactly around an object. With the three choosable steering modes (front, rear and round-a-round) the Twister dolly can maneuver itself comfortably and it can be filmed exactly around an object. According to your needs the front or the rear wheels will steer separately from each other or can be combined with each other. Also tightest curves are no problem because of an inner radius of 42cm. Both axles possess an excellent steering geometry for precise movements without screeching and remains quite silent. The geometry on the steering axles provides accurate movements with low dynamic friction and creates minimal operating noise. Additional ease of use is supplied by the newly developed rod that combines the well known drawbar with a rugged push bar. Six different positions for assembly of the push bar give additional support e.g. to the Steadycam operator. The steering rod is in every angle from 0-90° adjustable.

The FlexGripKit a unique modular system which consists primarily of 2 components: BasePlate and Legs. The BasePlate features a bubble level as well as versatile holes and threads for various purposes. All legs are identical and can be extended to your requirement. They have a flexible ratchet to cover different angles, made for difficult setups. Each leg can accept a seat or any kind of accessories (e. g. lamp). It is a universal tool for multi-purpose use and can be extended according to your needs.

The FlexGripKit covers following product categories:

Table Dolly (linear, curve + freestyle)

LowBoy / HiHat

Bazookabase (3-12 legs)

Camera Base

Rigging System (tubes 33-50mm)

Slider (on ground or tripod)

Tracking Dolly (36 + 62cm gauge)

Doorway Dolly (with Tire Set and steering)

Billet Bazooka

The new Gyro Head, G4 is the latest 4 axis, digital, gyro stabilized remote head system. ​The Gyro Head is the result of many years of experience in the design of gyro stabilized camera systems coupled with the in-field experience of working DOP’s and remote head operators.

Features:

superior roll and tilt stability under high dynamic vehicle maneuvers;

very low drift on pan and tilt axes, roll axis zero drift, gyros offset auto adjustment;

“idle” mode for changing cameras or lenses without head power off;

self-diagnostic system informs operator in case of faults and errors, balance; self-checking for motor overload protection;

available control types: joysticks, hand wheels, pan bar;

axes position indication, programmable rotational limits, head auto return to preset position;

head motion recording (3 min);

response curve and dead zone adjustments for joysticks, all sensors status indication;

Lens control system:

compatible with “Hedén” 24V motors and all TV zoom, focus lenses;

external motors status indication;zoom and focus value indication by preset points;

pan and tilt axes speed variation depending on current zoom value (zoom speed compensation).

Features:

four gyro stabilized axes;

max. speed: 200˚/sec for all axes;

rotational range: pan: ±540˚, tilt: +90˚/-180˚, roll: ±45˚;

pan, tilt stabilization accuracy: <1 arc min;

power requirements: ±24V, 14A;

power consumption: 3.0A in standby;

temperature range: -25 to 40˚C;

waterproof and dust protection class (IP 44);

gimbal weight: 30 kg;

max. payload: up to 30 kg;

dimensions: L: 815mm, W: 433 mm, H: 775 mm;

mounting base: standard Mitchell;

set up time: 30 min.

Weight excluding battery: 12.5kg

Weight including 6S 10Ah battery: 14kg

Camera weight: up to 23 kg / 50,7 lb

Camera cage internal dimensions: H300mm x W300mm x D360mm

Hollow shafts in all axis: tilt, roll, pan

Power source: 24V 10.000 – 22.000mah battery or 24V DC power supply

Quick and easy tool-less balancing

Built-in GPS antenna prevents drift horizon at high speed applications

Advanced IMU connected with encoders and 32bit main processor are responsible for fast reaction to any external factors disturbance (like car shakes, crane shakes, etc.)

Reinforced aluminum 6061 T6 and carbon fiber composite construction allows to get best quality stabilization even in the hardest terrain and weather conditions

Axis working range:

1. a) Tilt: + 90 / – 140
2. b) R oll: +60 / -60
3. c) Pan: continuous 360

4 direct drive brushless motors with encoders are responsible for high torque and speed of movement

3 types of control / performance:

1. a) Fixed stabilization (always pointing one direction)
2. b) Follow mode (aavailable on tilt/roll/pan axis)
3. c) Wireless radio control (available in all types of control)

Built-in 3 voltage regulators to power external devices (camera, follow focus, wireless vision, etc.):

1. a) 14V/6A (D-tap connector)
2. b) 12V/6A (D-tap connector)

Wireless controller range: 500m

Top and bottom mount possible

The MAXIMA gimbal is a 3-axis electronically stabilized gimbal. Its simple, lightweight design and perfect center of gravity provide new levels of freedom while its stable construction allows for compatibility with any camera system weighing 30 kg or less. At the center of the unique design is an extremely durable ball bearing roll cage as well as specially designed brushless motors. Optimized bearings and high torque ensure that there is always enough power in reserve, no matter how demanding the application. Carefully selected components enable seamless, reliable operation and impressive heat resistance.

Features:

V- Mount battery mount;

32-bit ARM-based multiprocessors;

fast and easy setup;

offset and off-balance compensation;

free positionable joystick;

1.5 inch OLED display;

The VacuRigg System is ideal for mounting cameras, lights or other accesories on all smooth surfaces like windows, cars, walls etc. Everytime – everywhere!

Depending on how the VacuRigg is used, the three suction pads can carry a maximum payload of up to 100 kg | 220 lbs. The Mounting plate is designed in such a way that it can accept the camera directly or mounted with a wedge/tilt plate with 3|8‘‘ screws. Assembly is completely done within seconds.

The special about the VacuRigg is the electrical pump system which keeps the vacuum automatically due to the integrated batteries. Long lasting support is guaranteed.

Your creative way of rigging knows no limit with the extension kit with its 33mm tubes.

The pump system can be connected to a socket and also directly to a car. Both necessary cables are included in the standard kit.

Features:

Automatically pump system with batteries

various vacuum pads available for versatile mounting

extremly stable

payload up to 100 kg | 220 lbs

compatible to standard accessories